Streamah wrote

TTG-CreAturE wrote I need help fixing the E 79 Code and one red light

E79 - This error occurs when your harddrive is defective, it might still work sometimes....
There is also a small chance that it is a cold joint under the Southbridge causing problems with the I/O of the HDD. It can also be related to wiring the diodes while JTAGGING. Couldn't start xam.xex

Try removing all storage devices and rebooting, if you still have issues then it could be a JTAG issue.

Ya tried that already without sucess but thanks for the help anyways

nB_Tryhard wrote i need help fixing 0020 error code on xenon jtag

If you're JTAG has had the x-clamps replaced with bolts then that MAY be the issue. I know i ran into that issue one time. * Yet to resolve it myself lol..

If that's the case, a simple loosen/tighten would do the trick.

Or you'll need a complete reflow or reball. Which can be pricey at times.

TTG-CreAturE wrote

Streamah wrote

TTG-CreAturE wrote I need help fixing the E 79 Code and one red light

E79 - This error occurs when your harddrive is defective, it might still work sometimes....
There is also a small chance that it is a cold joint under the Southbridge causing problems with the I/O of the HDD. It can also be related to wiring the diodes while JTAGGING. Couldn't start xam.xex

Try removing all storage devices and rebooting, if you still have issues then it could be a JTAG issue.

Ya tried that already without sucess but thanks for the help anyways

What kind of console is it, and it's JTAG'd correct?

It wouldn't be a hard drive problem if it is a JTaged xenon then you probably need to remap bad blocks if it is a hdmi console they you probably have the wrong smc

Streamah wrote

TTG-CreAturE wrote

Streamah wrote

TTG-CreAturE wrote I need help fixing the E 79 Code and one red light

E79 - This error occurs when your harddrive is defective, it might still work sometimes....
There is also a small chance that it is a cold joint under the Southbridge causing problems with the I/O of the HDD. It can also be related to wiring the diodes while JTAGGING. Couldn't start xam.xex

Try removing all storage devices and rebooting, if you still have issues then it could be a JTAG issue.

Ya tried that already without sucess but thanks for the help anyways

What kind of console is it, and it's JTAG'd correct?

Its a jtag xenon console. i mean i dont know how this could of happened, i just got it and it worked fine. Didnt install or update anything on it just started it up, turned it off and went to bed and woke up to it not working.

Are infecetable->
far knife
knock back
fast sprint
super javelin
super steady aim
super slight of hand
chrome mode
wall hack
uav always on

Can i get infected with them so when i go online i will always have them? or is it that i have to get a jatag in order to do this?

rajit12 wrote Are infecetable->
far knife
knock back
fast sprint
super javelin
super steady aim
super slight of hand
chrome mode
wall hack
uav always on

Can i get infected with them so when i go online i will always have them? or is it that i have to get a jatag in order to do this?

Are you talking about cod6 or cod4 you have to infect yourself every time you go to dashboard and you can only do those for cod4

I cant get dashlaunch 2.29 to boot into freestyle dash on start up, i have a falcon RGH, with a external HDD.

***Warning***
no launch.ini was found on any device, if you wish to use one you must create one and place it where dash launch (and installer) can fint it.

Checking for external patches
CB4558 found, type: falcon (glitch)
External patches not found;checking embedded patches

Patches don't need to be updated, already current

Flashing done, Press A to shut down

How Do I install TU6 Not TU7. I need the download link to all the files also. Thanks

why is my Jtag saying seaching for xenon.elf or unlinux on usb/cd/dvd?
what do i do?