ModdingFresh RGH Install - and it appears bricked
Posted:

ModdingFresh RGH Install - and it appears brickedPosted:

Bowd
  • Junior Member
Status: Offline
Joined: Nov 19, 20186Year Member
Posts: 72
Reputation Power: 4
Status: Offline
Joined: Nov 19, 20186Year Member
Posts: 72
Reputation Power: 4
https://weekendmodder.com/store/image/catalog/item%20pics/PLL%20and%20RST.png
The only thing i can think that has been strange is on my console the RST point did not come pre tinned




so i just installed matrix glitch chip
everytime i write ECC file. it bricks itself (Getting the green dot and nothing boots not even into xell)

When i write original updflash it boots as normal

i have re checked my wiring and cannot see anything un ordinary

If there was problems with the wiring wouldn't i get errors anyway.

appears like the console doe not want to be rghed at this point, just looking for some pointers

could it be the timing file? i know this glitch chip im using allready had a timing file [DETECTED]

should i have just used the original timing file.

the glitch chip blue light comes on then blinks twice and repeats but only when i switch the console on

its a PHAT Falcon using matrix glitch chip v1
#2. Posted:
Rodent
  • WIP 5.1
Status: Offline
Joined: Jan 21, 201212Year Member
Posts: 10,296
Reputation Power: 13606
Motto: LIVE IN YOUR WORLD! MOD IN OURS!
Motto: LIVE IN YOUR WORLD! MOD IN OURS!
Status: Offline
Joined: Jan 21, 201212Year Member
Posts: 10,296
Reputation Power: 13606
Motto: LIVE IN YOUR WORLD! MOD IN OURS!
if it doesn't boot then its probably RROD
reflash the nand and see if it will boot on original nand

what timing file are you using also ?
#3. Posted:
Bowd
  • Junior Member
Status: Offline
Joined: Nov 19, 20186Year Member
Posts: 72
Reputation Power: 4
Status: Offline
Joined: Nov 19, 20186Year Member
Posts: 72
Reputation Power: 4
Rodent_Modz wrote if it doesn't boot then its probably RROD
reflash the nand and see if it will boot on original nand

what timing file are you using also ?


yes it boots on original nand.

im using a timing file for phats 1.2 _21 or something like that.
#4. Posted:
Rodent
  • Christmas!
Status: Offline
Joined: Jan 21, 201212Year Member
Posts: 10,296
Reputation Power: 13606
Motto: LIVE IN YOUR WORLD! MOD IN OURS!
Motto: LIVE IN YOUR WORLD! MOD IN OURS!
Status: Offline
Joined: Jan 21, 201212Year Member
Posts: 10,296
Reputation Power: 13606
Motto: LIVE IN YOUR WORLD! MOD IN OURS!
Bowd wrote
Rodent_Modz wrote if it doesn't boot then its probably RROD
reflash the nand and see if it will boot on original nand

what timing file are you using also ?


yes it boots on original nand.

im using a timing file for phats 1.2 _21 or something like that.


use timing file 1.2_19
#5. Posted:
Bowd
  • Junior Member
Status: Offline
Joined: Nov 19, 20186Year Member
Posts: 72
Reputation Power: 4
Status: Offline
Joined: Nov 19, 20186Year Member
Posts: 72
Reputation Power: 4
Rodent_Modz wrote
Bowd wrote
Rodent_Modz wrote if it doesn't boot then its probably RROD
reflash the nand and see if it will boot on original nand

what timing file are you using also ?


yes it boots on original nand.

im using a timing file for phats 1.2 _21 or something like that.


use timing file 1.2_19


still no luck just tried that timing and it still does not want to boot , i just get a blinking green dot
#6. Posted:
Rodent
  • V5 Launch
Status: Offline
Joined: Jan 21, 201212Year Member
Posts: 10,296
Reputation Power: 13606
Motto: LIVE IN YOUR WORLD! MOD IN OURS!
Motto: LIVE IN YOUR WORLD! MOD IN OURS!
Status: Offline
Joined: Jan 21, 201212Year Member
Posts: 10,296
Reputation Power: 13606
Motto: LIVE IN YOUR WORLD! MOD IN OURS!
Bowd wrote
Rodent_Modz wrote
Bowd wrote
Rodent_Modz wrote if it doesn't boot then its probably RROD
reflash the nand and see if it will boot on original nand

what timing file are you using also ?


yes it boots on original nand.

im using a timing file for phats 1.2 _21 or something like that.


use timing file 1.2_19


still no luck just tried that timing and it still does not want to boot , i just get a blinking green dot


show me a pic of your chip and full install on board i think i know what the problem is just need to see for myself
#7. Posted:
Bowd
  • Junior Member
Status: Offline
Joined: Nov 19, 20186Year Member
Posts: 72
Reputation Power: 4
Status: Offline
Joined: Nov 19, 20186Year Member
Posts: 72
Reputation Power: 4
imgur.com/lWhSsej

imgur.com/a/PbNw1bg
#8. Posted:
Bowd
  • Junior Member
Status: Offline
Joined: Nov 19, 20186Year Member
Posts: 72
Reputation Power: 4
Status: Offline
Joined: Nov 19, 20186Year Member
Posts: 72
Reputation Power: 4
[quote="Rodent_Modz"][quote="Bowd"]
Rodent_Modz wrote
Bowd wrote
Rodent_Modz wrote if it doesn't boot then its probably RROD
reflash the nand and see if it will boot on original nand

what timing file are you using also ?


yes it boots on original nand.

im using a timing file for phats 1.2 _21 or something like that.


use timing file 1.2_19


still no luck just tried that timing and it still does not want to boot , i just get a blinking green dot[/quote

imgur.com/a/PbNw1bg
#9. Posted:
Rodent
  • Blind Luck
Status: Offline
Joined: Jan 21, 201212Year Member
Posts: 10,296
Reputation Power: 13606
Motto: LIVE IN YOUR WORLD! MOD IN OURS!
Motto: LIVE IN YOUR WORLD! MOD IN OURS!
Status: Offline
Joined: Jan 21, 201212Year Member
Posts: 10,296
Reputation Power: 13606
Motto: LIVE IN YOUR WORLD! MOD IN OURS!
Bowd wrote imgur.com/lWhSsej

imgur.com/a/PbNw1bg


i would route the wires differently and i would fix the FT28 point


Last edited by Rodent ; edited 1 time in total
#10. Posted:
Bowd
  • Junior Member
Status: Offline
Joined: Nov 19, 20186Year Member
Posts: 72
Reputation Power: 4
Status: Offline
Joined: Nov 19, 20186Year Member
Posts: 72
Reputation Power: 4
Rodent_Modz wrote
Bowd wrote imgur.com/lWhSsej

imgur.com/a/PbNw1bg


i will take a look and message you on ttg messanger


ok thanks
Users browsing this topic: None
Jump to:


RECENT POSTS

HOT TOPICS