AdviceFans spinning on and off; Monitor says no HDMI signal
Posted:
AdviceFans spinning on and off; Monitor says no HDMI signalPosted:
Status: Offline
Joined: Sep 02, 20222Year Member
Posts: 1
Reputation Power: 0
|
Hi,
Just completed my first PC build. I got all the parts from another family member, and they all appeared to be in good condition but I didn't know which ones were new/used. The only issue during the build is that one of the motherboard screws went in at an angle. I struggled to take the screw out so I just left it in because I didn't want to accidently damage the motherboard to try to take it out with force. I kept going with the build instead and just screwed the angled screw in the best I could. Every other part of the build went smoothly. Once I turned it on, the fans (Graphics card, CPU cooler and other fans) would start, then stop and start again, back and forth. The monitor says "HDMI no signal". I reset the CMOS, no change. I took out the RAM and then the fans started to spin continuously, so I got new RAM, but when I tried it, the fans still spun on and off. I'm not sure if that means it's the connection with the motherboard or something else. Help please! Processor: Intel Pentium G4560 Motherboard: ASRock B250M Pro4 Cabinet: Fractal Design Define RAM: Corsair Vengeance LPX DDR4 2400MHz (First time 2x4gb/8gb) (second time 2x8gb/16gb) Storage: Crucial MX500 SSD Graphics Card: EVGA GEFORCE GTX 1050 Ti Power Supply: Seasonic M12 II Bronze EVO Edition Cabinet Cooler: Fractal Design Dynamic X2 GP-12 CPU Cooler: Cryorig C7 |
#2. Posted:
Status: Offline
Joined: Dec 18, 201013Year Member
Posts: 814
Reputation Power: 38
Status: Offline
Joined: Dec 18, 201013Year Member
Posts: 814
Reputation Power: 38
| Looks like that CPU has onboard graphics. Try disconnecting the GPU and just seeing if the CPU, Mobo combo outputs at least the Asrock splash screen. If it doesn't, you're looking at a bad motherboard. |
- 0useful
- 0not useful
Users browsing this topic: None