GeneralHow do I install this graphics card
Posted:

GeneralHow do I install this graphics cardPosted:

Rareparrot
  • V5 Launch
Status: Offline
Joined: Jan 09, 20159Year Member
Posts: 5,274
Reputation Power: 5637
Status: Offline
Joined: Jan 09, 20159Year Member
Posts: 5,274
Reputation Power: 5637
Its an rtx 3080 and idk what im doing
https://youtube.com/shorts/FVLNNq-eCc4?feature=share
#2. Posted:
Loke
  • Idea Guy
Status: Offline
Joined: Oct 12, 201113Year Member
Posts: 6,160
Reputation Power: 26328
Motto: Everything is easy if you don't try!
Motto: Everything is easy if you don't try!
Status: Offline
Joined: Oct 12, 201113Year Member
Posts: 6,160
Reputation Power: 26328
Motto: Everything is easy if you don't try!
Jam it into the pci slot screw the bracket on the left then shove power cables into the power cable hole


Bing bang boom done


Last edited by Loke ; edited 1 time in total
#3. Posted:
Rareparrot
  • TTG Undisputed
Status: Offline
Joined: Jan 09, 20159Year Member
Posts: 5,274
Reputation Power: 5637
Status: Offline
Joined: Jan 09, 20159Year Member
Posts: 5,274
Reputation Power: 5637
Pci slot?
#4. Posted:
Loke
  • Idea Guy
Status: Offline
Joined: Oct 12, 201113Year Member
Posts: 6,160
Reputation Power: 26328
Motto: Everything is easy if you don't try!
Motto: Everything is easy if you don't try!
Status: Offline
Joined: Oct 12, 201113Year Member
Posts: 6,160
Reputation Power: 26328
Motto: Everything is easy if you don't try!
#5. Posted:
Rareparrot
  • Comment King
Status: Offline
Joined: Jan 09, 20159Year Member
Posts: 5,274
Reputation Power: 5637
Status: Offline
Joined: Jan 09, 20159Year Member
Posts: 5,274
Reputation Power: 5637
Its stuck again
#6. Posted:
Rareparrot
  • Winter 2022
Status: Offline
Joined: Jan 09, 20159Year Member
Posts: 5,274
Reputation Power: 5637
Status: Offline
Joined: Jan 09, 20159Year Member
Posts: 5,274
Reputation Power: 5637
Its got screws in pci
#7. Posted:
154
  • Download King
Status: Offline
Joined: May 04, 201410Year Member
Posts: 2,747
Reputation Power: 4457
Status: Offline
Joined: May 04, 201410Year Member
Posts: 2,747
Reputation Power: 4457
Rareparrot wrote Its got screws in pci

The slot where the card goes into will have a little tab type thing on the right side of the slot, push that down and it'll allow you to slot the card in, push firmly until the tab thingy clicks back into place as originally found. The gpu where the hdmi/display port slots etc are will have a bracket which will slot into the left side of the case where you the screw the gpu to the case

https://i.imgur.com/mSMdcji.jpeg

Otherwise just look up some videos on youtube, its a pretty simple process
#8. Posted:
Rareparrot
  • Winter 2021
Status: Offline
Joined: Jan 09, 20159Year Member
Posts: 5,274
Reputation Power: 5637
Status: Offline
Joined: Jan 09, 20159Year Member
Posts: 5,274
Reputation Power: 5637
Oh i got it in place now what are these wires
#9. Posted:
Rareparrot
  • Winter 2021
Status: Offline
Joined: Jan 09, 20159Year Member
Posts: 5,274
Reputation Power: 5637
Status: Offline
Joined: Jan 09, 20159Year Member
Posts: 5,274
Reputation Power: 5637
https://youtube.com/shorts/TQfu1htKDDA?feature=share
#10. Posted:
154
  • Fairy Master
Status: Offline
Joined: May 04, 201410Year Member
Posts: 2,747
Reputation Power: 4457
Status: Offline
Joined: May 04, 201410Year Member
Posts: 2,747
Reputation Power: 4457
Rareparrot wrote https://youtube.com/shorts/TQfu1htKDDA?feature=share

Yeah, so your gpu is 16 pins (16 holes), the cables you got there are two 6 pins with 2 additional pins on each one so to speak - the 2 pins connect to the 6 pin to make 8, you dont need to click them into place so to speak you can just hold them together and plug them into the gpu, doesn't matter which way around the wires are plugged in, just as long as all 16 holes have a wire in. the cables are split into 6 pins with a small 2 pins because certain gpus require only a 6 pin for example, ignore this though and look at it as two 8 pins for your sake

In essence, just plug the wires you had in your hand in that video into the gpu, the cable slots in a fitted way which you'll figure out, but other than that the cables can go in however is easiest

You may have additional wires as some gpus require more or less cables, just as long as both of your 8 pin slots have cables into them, you'll be good to go and can ignore any additional wires on that branch of wires you were holding
Users browsing this topic: None
Jump to:


RECENT POSTS

HOT TOPICS