Xbox 3604GB nand Help(Won't Read)
Posted:

Xbox 3604GB nand Help(Won't Read)Posted:

extremeconsole
  • New Member
Status: Offline
Joined: Jul 02, 20222Year Member
Posts: 28
Reputation Power: 4
Status: Offline
Joined: Jul 02, 20222Year Member
Posts: 28
Reputation Power: 4
Hello I'm trying to read my corona 4GB nand but still can't get it to read I have tried around 5 times on different consoles, R2C7, R2C6, and R2C10 all have resistors in place

Using the xflasher360

ibb.co/Jnts4Mm
ibb.co/YDpjSBv
ibb.co/pdhgfc3
ibb.co/CHr5R6M
ibb.co/z8bf5PD
#2. Posted:
Rodent
  • 2 Million
Status: Offline
Joined: Jan 21, 201212Year Member
Posts: 10,296
Reputation Power: 13599
Motto: LIVE IN YOUR WORLD! MOD IN OURS!
Motto: LIVE IN YOUR WORLD! MOD IN OURS!
Status: Offline
Joined: Jan 21, 201212Year Member
Posts: 10,296
Reputation Power: 13599
Motto: LIVE IN YOUR WORLD! MOD IN OURS!
Cross d wire meaning they could be touching one another. Pulled a trace. Or lifted a trace or bridged solder point. Or cold solder joint

Many years I have been doing these. And had ones I couldn't read myself. With learning and lots of prectice I still come across problems. If it's not the soldering issues. It seems to always be a communication between motherboard and PC. So many different things to try.

Power off the console completely unplug nand reader to see if consoles boots still.

Possibly could of formatted the motherboard.

Try to go over each point and make sure points are bridged where needed to be sometimes no bridging certain points you can't read the nand
#3. Posted:
extremeconsole
  • New Member
Status: Offline
Joined: Jul 02, 20222Year Member
Posts: 28
Reputation Power: 4
Status: Offline
Joined: Jul 02, 20222Year Member
Posts: 28
Reputation Power: 4
Rodent wrote Cross d wire meaning they could be touching one another. Pulled a trace. Or lifted a trace or bridged solder point. Or cold solder joint

Many years I have been doing these. And had ones I couldn't read myself. With learning and lots of prectice I still come across problems. If it's not the soldering issues. It seems to always be a communication between motherboard and PC. So many different things to try.

Power off the console completely unplug nand reader to see if consoles boots still.

Possibly could of formatted the motherboard.

Try to go over each point and make sure points are bridged where needed to be sometimes no bridging certain points you can't read the nand
Iknow they are so annoying but hopefully I'll get it working I have tried around 5 4GB's but I'm gonna order a different programmer
#4. Posted:
Rodent
  • WIP 5.1
Status: Offline
Joined: Jan 21, 201212Year Member
Posts: 10,296
Reputation Power: 13599
Motto: LIVE IN YOUR WORLD! MOD IN OURS!
Motto: LIVE IN YOUR WORLD! MOD IN OURS!
Status: Offline
Joined: Jan 21, 201212Year Member
Posts: 10,296
Reputation Power: 13599
Motto: LIVE IN YOUR WORLD! MOD IN OURS!
I use the 4GB quick solder boards. And a USB reader. I will get error codes. Which means the qsb isn't soldered correctly
Users browsing this topic: None
Jump to:


RECENT POSTS

HOT TOPICS