ModdingWinbond 2K Ram RGH instructions
Posted:

ModdingWinbond 2K Ram RGH instructionsPosted:

Rodent
  • Supporter
Status: Offline
Joined: Jan 21, 201212Year Member
Posts: 10,288
Reputation Power: 13535
Motto: **** it
Motto: **** it
Status: Offline
Joined: Jan 21, 201212Year Member
Posts: 10,288
Reputation Power: 13535
Motto: **** it
Here's a guide on how to build your glitch image for the wb2k ram using j-runner.

Make sure your j-runner is upto date.

First thing to do is read your nand a couple of time's,make sure you get at least 2 matching nanddumps.

Next you want to write the ECC file to your console,so click on load source and locate the ECC folder in j-runner.

It will be j-runner/common/ECC click on the ECC folder and select one of the CR4 corona ecc files.

http://s25.postimg.org/m9m7dbs67/7_ecc.jpg

Here i Selected the CORONA_16MB_CR4.ecc just for this guide,then click on open.

http://s25.postimg.org/dsmp2enhb/8_ecc.jpg

Once loaded into source select corona as your mobo type,then click write ECC.

http://s25.postimg.org/pvwm3pnxb/9_ecc.jpg

Once you have got your CPUKEY you can then create your glitch image.

A new version of j-runner is out,so here's how to use it for the WB2K consoles.

Load your nanddump into source,then on the XeBuild tab,select your dash version you want to create,then tick the CR4 tab.so it's something like the image below.

http://s25.postimg.org/v1t3ubd5r/wb2k_1.jpg

Next select the patches/dashlaunch tab,and tick WB or WB4G.(WB = 16mb mobos) and (WB4G = 4gb mobos),next press create XeBuild image.

http://s25.postimg.org/d09ywij4v/wb2k_2.jpg

You should get this pop up it's upto you if you click yes or no,i always click on yes.
And wait for it to create your glitch image.

http://s25.postimg.org/sr9pakrxb/image.jpg

http://s25.postimg.org/mm3jctaan/wb2k3.jpg

Once it's finished the create process you can then write the image to your console.

That's all there is to it,nice and simple.

Proof of Install with Cr4xl
XeX_Static Console
One of the harder consoles to RGH this is a newer XBOX360 Winbond 2KB Ram W64 console installed CR4xl
http://i67.tinypic.com/2n19fe1.jpg
Video Proof


Last edited by Rodent ; edited 2 times in total

The following 15 users thanked Rodent for this useful post:

RWD (07-15-2020), samule (07-12-2020), ShawnunderSe7en (07-11-2020), XeCrippy (03-06-2019), Supervisor (10-18-2017), James (03-07-2017), GME (03-07-2017), RepBandit (03-06-2017), Puppet_Master (03-06-2017), Tom (03-06-2017), Activez- (03-06-2017), Sean (03-06-2017), Dalm (03-06-2017), Chat (03-06-2017), dj (03-06-2017)
#2. Posted:
Console_King
  • TTG Addict
Status: Offline
Joined: Jul 24, 201014Year Member
Posts: 2,333
Reputation Power: 169
Status: Offline
Joined: Jul 24, 201014Year Member
Posts: 2,333
Reputation Power: 169
Nice tutorial, im sure some users will find this useful.
#3. Posted:
Rodent
  • Summer 2023
Status: Offline
Joined: Jan 21, 201212Year Member
Posts: 10,288
Reputation Power: 13535
Motto: **** it
Motto: **** it
Status: Offline
Joined: Jan 21, 201212Year Member
Posts: 10,288
Reputation Power: 13535
Motto: **** it
Pic of the Ram Chips so you know how to Identify them! Under the heatsync http://i63.tinypic.com/zntuh2.jpg
#4. Posted:
Puppet_Master
Status: Offline
Joined: Oct 02, 20168Year Member
Posts: 153
Reputation Power: 53
Status: Offline
Joined: Oct 02, 20168Year Member
Posts: 153
Reputation Power: 53
Nice release. Will have to use this when i get a board with winbond ram.
#5. Posted:
X0_LOJ_0X
  • New Member
Status: Offline
Joined: Oct 18, 20177Year Member
Posts: 1
Reputation Power: 0
Status: Offline
Joined: Oct 18, 20177Year Member
Posts: 1
Reputation Power: 0
know this post is kinda old but im using a ace v3 and i cant boot xell after building ecc from nanddump and flashing it to nand (flashing back stock nand boots though) my question is: will flashing one of those ecc files get me to boot xell? i already confirmed i have the windbond 2kb ram and my console is a E series 4gb (and its not a winchester motherboard i made certain of that too before posting)

so if flashing one of those will allow me to boot xell so i can get cupkey to build hacked image, should i flash CORONA_4GB.ecc like how im using a ace v3 or should i flash CORONA_4GB_CR4.ecc regardless even though im not using a cr4?
#6. Posted:
Rodent
  • V5 Launch
Status: Offline
Joined: Jan 21, 201212Year Member
Posts: 10,288
Reputation Power: 13535
Motto: **** it
Motto: **** it
Status: Offline
Joined: Jan 21, 201212Year Member
Posts: 10,288
Reputation Power: 13535
Motto: **** it
X0_LOJ_0X wrote know this post is kinda old but im using a ace v3 and i cant boot xell after building ecc from nanddump and flashing it to nand (flashing back stock nand boots though) my question is: will flashing one of those ecc files get me to boot xell? i already confirmed i have the windbond 2kb ram and my console is a E series 4gb (and its not a winchester motherboard i made certain of that too before posting)

so if flashing one of those will allow me to boot xell so i can get cupkey to build hacked image, should i flash CORONA_4GB.ecc like how im using a ace v3 or should i flash CORONA_4GB_CR4.ecc regardless even though im not using a cr4?


try this first
WB4G if that doesnt work i will help you get this booted shouldn't have to flash the ACE V3 chip just right this ecc to the console
#7. Posted:
alejarras
  • New Member
Status: Offline
Joined: Oct 22, 20186Year Member
Posts: 1
Reputation Power: 0
Status: Offline
Joined: Oct 22, 20186Year Member
Posts: 1
Reputation Power: 0
I can use an ace v3 pro using the same ecc only change to WB4G?
#8. Posted:
Rodent
  • Gold Member
Status: Offline
Joined: Jan 21, 201212Year Member
Posts: 10,288
Reputation Power: 13535
Motto: **** it
Motto: **** it
Status: Offline
Joined: Jan 21, 201212Year Member
Posts: 10,288
Reputation Power: 13535
Motto: **** it
alejarras wrote I can use an ace v3 pro using the same ecc only change to WB4G?

Correct should work
#9. Posted:
Su1c1dalM0nk3y
  • New Member
Status: Offline
Joined: Aug 08, 20168Year Member
Posts: 1
Reputation Power: 0
Status: Offline
Joined: Aug 08, 20168Year Member
Posts: 1
Reputation Power: 0
Hi Everyone,
On the matter of WINBOND vs SAMSUNG RAM - am I correct in thinking that you would then select NONE under the WINBOND selection of J-RUNNER if you have SAMSUNG RAM on your CORONA 4G SLIM motherboard running BUILD Glitch2m?
#10. Posted:
XeCrippy
  • Blind Luck
Status: Offline
Joined: May 12, 20168Year Member
Posts: 1,909
Reputation Power: 1262
Status: Offline
Joined: May 12, 20168Year Member
Posts: 1,909
Reputation Power: 1262
Su1c1dalM0nk3y wrote Hi Everyone,
On the matter of WINBOND vs SAMSUNG RAM - am I correct in thinking that you would then select NONE under the WINBOND selection of J-RUNNER if you have SAMSUNG RAM on your CORONA 4G SLIM motherboard running BUILD Glitch2m?
You just wouldn't select anything as far as patches go, just set the motherboard version to Corona 4GB
Users browsing this topic: None
Jump to:


RECENT POSTS

HOT TOPICS