Hey, I see that nothing has been posted here yet. So I figured I'd throw a quick tut on how to get a open nat type for those that don't have it already on their Xbox One.

First: We will want to set up a static Ip address for your Xbox one.

If you know your routers address then log right in

If not try this.

( Start -> Run -> cmd -> ipconfig)
1ipconfig.png

Your default Gateway will bring you to your router. Most routers default passwords can be found via google.

Now set up a static Ip address to what ever you would like, It should be under your settings in LAN Setup and save the changes. Make sure to write down what ever one you decide.


Now, Go to your port forwarding tab and add these to the list. With the ip address you just set up and save the changes.


TCP - 53
TCP - 80
TCP - 3074
TCP - 3478-3480
UDP - 53
UDP - 88
UDP - 500
UDP - 3074
UDP - 3544
UDP - 4500

Now go into your admin tab or settings and reboot your router.

Next: Start your Xbox 1.

Go to [settings | network | advanced settings | Ip settings | and put in your new static ip

Test your network connection to make sure it works.

And reset your Xbox One for good measure.

You should now have a open Nat on Cod and Bf4