Hey Guys! This tutorial is on how to root a Samsung Galaxy s3!

Requirements

1.Samsung Galaxy S III GT-I9300 (International version) with more than 50% battery remaining, 100% just to be on the safer side of the fence
2.CF-Root package for Galaxy S3
3.Odin3 v3.07
4.Latest Samsung USB drivers (should already be there if you have Kies installed)
5.Galaxy S3 USB cable for connection

Procedure

Step 1: Download both Odin3 and CF-Auto Root packages from the link above. Extract the contents of the root package to a location of your choice.

Step 2: Launch Odin3, click the PDA button and select the .tar.md5 file that you extracted from the CF Root package.

Step 3: Make sure that Re-partition is unchecked in Odin3, and that nothing is selected in PIT.

Step 4: Turn off your Galaxy S III and put it in download mode by pressing and holding volume down+power+home at the same time, and then pressing volume up for confirmation.

Step 5: With your device in Download Mode, connect it to the PC using the USB cable. If all went correct, Odin3 will detect the device, indicated by a COM address in the top left corner of Odin3.

Step 6: Double check that the correct PDA file is selected and that re-partition isnt checked, and hit the Start button to begin flashing the rooted kernel.

Step 7: Once the flash is complete, the phone will reboot and enter recovery mode, automatically initiating the rooting procedure. It will reboot once more.

Thanks for reading guys! Please comment. [ Register or Signin to view external links. ] [ Register or Signin to view external links. ] [ Register or Signin to view external links. ]