You are viewing our Forum Archives. To view or take place in current topics click here.
Jtag reflow question | Please help
Posted:

Jtag reflow question | Please helpPosted:

ch3at
  • New Member
Status: Offline
Joined: Nov 05, 201113Year Member
Posts: 41
Reputation Power: 1
Status: Offline
Joined: Nov 05, 201113Year Member
Posts: 41
Reputation Power: 1
I was wondering how long does the heat gun method last if done right, before getting 3 rrod again?
And if its not long like kinda permanent then is it better to save up for the best reflow with that machine thing etc...
So what I am saying is, Will the Heat Gun method of reflowing fix it semi permanently or permanently or kinda long.
#2. Posted:
Kong
  • TTG Fanatic
Status: Offline
Joined: May 31, 201014Year Member
Posts: 4,513
Reputation Power: 293
Status: Offline
Joined: May 31, 201014Year Member
Posts: 4,513
Reputation Power: 293
It will most likely be a temp fix,

could last for a week, month if lucky 6months. but be prepared it will come back.

How ever, for a Permanent fix, you will need the Re-flow Machine I use: aoyue 968
#3. Posted:
Hilton
  • Retired Staff
Status: Offline
Joined: Jun 06, 201014Year Member
Posts: 2,427
Reputation Power: 4340
Status: Offline
Joined: Jun 06, 201014Year Member
Posts: 2,427
Reputation Power: 4340
If done correctly it is the same as a reflow station (as that is a heated plate with a heat gun above)

If you want a professional fix then a reball is the way to go, as the RRoD is caused by the soldier under the chip cracking.

[ Register or Signin to view external links. ]

https://www.thetechgame.com/Forums/t=2657944/tut-how-to-temp-perm-fix-rrod-cheap-way.html


Last edited by Hilton ; edited 2 times in total
#4. Posted:
PCP008
  • TTG Addict
Status: Offline
Joined: Apr 16, 201014Year Member
Posts: 2,287
Reputation Power: 128
Status: Offline
Joined: Apr 16, 201014Year Member
Posts: 2,287
Reputation Power: 128
HILTON wrote If done correctly it is the same as a reflow station (as that is a heated plate with a heat gun above)

If you want a professional fix then a reball is the way to go, as the RRoD is caused by the soldier under the chip cracking.

[ Register or Signin to view external links. ]


I wouldnt label it the same as a reflow station, is get it repaired correctly by a reflow or reball mate from a professional setup.
#5. Posted:
Hilton
  • Retired Staff
Status: Offline
Joined: Jun 06, 201014Year Member
Posts: 2,427
Reputation Power: 4340
Status: Offline
Joined: Jun 06, 201014Year Member
Posts: 2,427
Reputation Power: 4340
-PCP008- wrote
HILTON wrote If done correctly it is the same as a reflow station (as that is a heated plate with a heat gun above)

If you want a professional fix then a reball is the way to go, as the RRoD is caused by the soldier under the chip cracking.

[ Register or Signin to view external links. ]


I wouldnt label it the same as a reflow station, is get it repaired correctly by a reflow or reball mate from a professional setup.


A reflow station pre heats the board and the "heat gun" on the top heats the chip to a certain temp for X amount of time..... As long as you do the same then you will get the same result.

NOTE: Yes I said "heat gun" as that is what is on the top of a reflow station
#6. Posted:
Kong
  • TTG Fanatic
Status: Offline
Joined: May 31, 201014Year Member
Posts: 4,513
Reputation Power: 293
Status: Offline
Joined: May 31, 201014Year Member
Posts: 4,513
Reputation Power: 293
a Reflow Station i.e (machine) doesn't preheat the board.

you're thinking of a griddle what some people use as a preheater < wouldn't recommend using this due to board flexing.
#7. Posted:
ch3at
  • New Member
Status: Offline
Joined: Nov 05, 201113Year Member
Posts: 41
Reputation Power: 1
Status: Offline
Joined: Nov 05, 201113Year Member
Posts: 41
Reputation Power: 1
Kong wrote I am awesome


Thanks for the help Kong and everyone else too. I have a guy I found on Craig's list that can do it for $35 and if it ever breaks again he said he will do it again for free:D. So yeah thanks I will save up for the professional reflow.


Last edited by ch3at ; edited 1 time in total
#8. Posted:
ch3at
  • New Member
Status: Offline
Joined: Nov 05, 201113Year Member
Posts: 41
Reputation Power: 1
Status: Offline
Joined: Nov 05, 201113Year Member
Posts: 41
Reputation Power: 1
HILTON wrote If done correctly it is the same as a reflow station (as that is a heated plate with a heat gun above)

If you want a professional fix then a reball is the way to go, as the RRoD is caused by the soldier under the chip cracking.

[ Register or Signin to view external links. ]

https://www.thetechgame.com/Forums/t=2657944/tut-how-to-temp-perm-fix-rrod-cheap-way.html


Nice reply, I like that you added a picture to better explain the process. Aye aha I am from Vegas too sweet:D
#9. Posted:
ch3at
  • New Member
Status: Offline
Joined: Nov 05, 201113Year Member
Posts: 41
Reputation Power: 1
Status: Offline
Joined: Nov 05, 201113Year Member
Posts: 41
Reputation Power: 1
ch3at wrote
HILTON wrote If done correctly it is the same as a reflow station (as that is a heated plate with a heat gun above)

If you want a professional fix then a reball is the way to go, as the RRoD is caused by the soldier under the chip cracking.

[ Register or Signin to view external links. ]

https://www.thetechgame.com/Forums/t=2657944/tut-how-to-temp-perm-fix-rrod-cheap-way.html


Nice reply, I like that you added a picture to better explain the process. Aye aha I am from Vegas too sweet:D


Hilton I just took a look at your post on how to temp/perm fix RROD thanks dude great Tut!
Jump to:
You are viewing our Forum Archives. To view or take place in current topics click here.