You are viewing our Forum Archives. To view or take place in current topics click here.
#41. Posted:
IAMR1SKY
  • Powerhouse
Status: Offline
Joined: May 06, 201212Year Member
Posts: 466
Reputation Power: 17
Status: Offline
Joined: May 06, 201212Year Member
Posts: 466
Reputation Power: 17
I'd say it's either defective ram or defective ram slot on the board

Try using every slot to see if one of them works. Or try borrowing a different stick of ram from a different computer and doing the same thing. And while doing all of this testing, keep the GPU out until you get it to boot up. Double check all of your cords to make sure they all clipped in. and definitely clean up the wiring in your computer. Having all the cords dangling in front of your motherboard won't help with airflow and it looks ugly
#42. Posted:
Shiv
  • TTG Contender
Status: Offline
Joined: May 10, 201212Year Member
Posts: 3,129
Reputation Power: 451
Status: Offline
Joined: May 10, 201212Year Member
Posts: 3,129
Reputation Power: 451
See the codes below

AMI BIOS beep codes


1 short DRAM refresh failure
2 short Parity circuit failure
3 short Base 64K RAM failure
4 short System timer failure
5 short Process failure
6 short Keyboard controller Gate A20 error
7 short Virtual mode exception error
8 short Display memory Read/Write test failure
9 short ROM BIOS checksum failure
10 short CMOS shutdown Read/Write error
11 short Cache Memory error
1 long, 3 short Conventional/Extended memory failure
1 long, 8 short Display/Retrace test failed
two-tone siren Low CPU Fan speed, Voltage Level issue




Dell beep codes

1 beep BIOS ROM corruption or failure
2 beeps Memory (RAM) not detected
3 beeps Motherboard failure
4 beeps Memory (RAM) failure
5 beeps CMOS Battery failure
6 beeps Video card failure
7 beeps Bad processor (CPU)




IBM BIOS beep codes


No Beeps No Power, Loose Card, or Short.
1 Short Beep Normal POST, computer is ok.
2 Short Beep POST error, review screen for error code.
Continuous Beep No Power, Loose Card, or Short.
Repeating Short Beep No Power, Loose Card, or Short.
1 Long and 1 Short Beep Motherboard issue.
1 Long and 2 Short Beeps Video (Mono/CGA Display Circuitry) issue.
1 Long and 3 Short Beeps. Video (EGA) Display Circuitry.
3 Long Beeps Keyboard or Keyboard card error.
1 Beep, Blank or Incorrect Display Video Display Circuitry.
#43. Posted:
teebag99
  • Challenger
Status: Offline
Joined: Dec 10, 201013Year Member
Posts: 140
Reputation Power: 5
Status: Offline
Joined: Dec 10, 201013Year Member
Posts: 140
Reputation Power: 5
Happened to me a week ago

Check your power cable from power supply to the cou make sure it hasn't burnt out also smell check your graphics card make sure it's fine
#44. Posted:
iown3dyew
  • Ladder Climber
Status: Offline
Joined: Oct 06, 201113Year Member
Posts: 393
Reputation Power: 19
Status: Offline
Joined: Oct 06, 201113Year Member
Posts: 393
Reputation Power: 19
It looks like you didn't take the black cover piece off where the GPU fits in. Take the black cover piece off then fit the GPU in further into the slot. The black piece is stopping the HDMI cable from going into the slot fully.
#45. Posted:
iown3dyew
  • Ladder Climber
Status: Offline
Joined: Oct 06, 201113Year Member
Posts: 393
Reputation Power: 19
Status: Offline
Joined: Oct 06, 201113Year Member
Posts: 393
Reputation Power: 19
Also your Motherboard won't show anything with HDMI plugged in if your GPU is also plugged in. But it's more than likely that black cover piece let me know if it works
#46. Posted:
LilPeep
  • TTG Master
Status: Offline
Joined: Oct 09, 201311Year Member
Posts: 873
Reputation Power: 71
Status: Offline
Joined: Oct 09, 201311Year Member
Posts: 873
Reputation Power: 71
iown3dyew wrote Also your Motherboard won't show anything with HDMI plugged in if your GPU is also plugged in. But it's more than likely that black cover piece let me know if it works


The black cover is gone, also I disconnected the the GPU, like took it out completely and tried I the motherboard and nothing
#47. Posted:
CadianSquad
  • Challenger
Status: Offline
Joined: Jan 20, 20177Year Member
Posts: 107
Reputation Power: 8
Status: Offline
Joined: Jan 20, 20177Year Member
Posts: 107
Reputation Power: 8
Remove the Graphics card, plug HDMI into Motherboard and check if that works, if so double check you've put the GPU into the PCI slot on the Mobo, make sure there's enough power going to the card also - From there, replug HDMI into the card, reboot the PC and like magic, it should work - PS Make sure you are running the correct source on your TV
#48. Posted:
The75thExpert
  • New Member
Status: Offline
Joined: Jul 30, 20168Year Member
Posts: 33
Reputation Power: 1
Status: Offline
Joined: Jul 30, 20168Year Member
Posts: 33
Reputation Power: 1
This is a common mistake made by newbies to PC's.
Jump to:
You are viewing our Forum Archives. To view or take place in current topics click here.