You are viewing our Forum Archives. To view or take place in current topics click here.
OMFG! i got RROD on my Jtag! lawlz Please Help tho!
Posted:

OMFG! i got RROD on my Jtag! lawlz Please Help tho!Posted:

TTGBoi
  • TTG Addict
Status: Offline
Joined: Jul 27, 201014Year Member
Posts: 2,723
Reputation Power: 121
Status: Offline
Joined: Jul 27, 201014Year Member
Posts: 2,723
Reputation Power: 121
Ok, well i turned on my jtag yesterday (just got it like 2 weeks ago from NinjaDefuse) and it got the 3 rings (section 1, 3, and 4 are illuminating red) and i checked the secondary error codes and i got 0102....

is this the X-Clamp fix?

Of what i found from a thread on TTG, it is this: 0102 - Error in the "Digital Backbone" (CPU/GPU/RAM), this is usually caused by a cold solder joint between the GPU and the mainboard.
There are two theories to fixing this one deals with the "X" clamps that hold down the chips. The other involves re-Heating the chips. DO NOT attempt either of these if your console is still under warranty. If your console is still under warranty return it to the store where it was purchased or call MS to have it replaced.

Please help! I WILL be hosting lobbies after i get it fixed because i am running TU6 right now (IDK how tho lol but it runs)

------------------------------------------------------------------------------------

Also, is there a way that i can open the console without a case opening tool OR a torx screw driver?

thanks to anybody who is helpful and i will be +repping!

-TTGBoi
#2. Posted:
TTGBoi
  • TTG Addict
Status: Offline
Joined: Jul 27, 201014Year Member
Posts: 2,723
Reputation Power: 121
Status: Offline
Joined: Jul 27, 201014Year Member
Posts: 2,723
Reputation Power: 121
can somebody please help me? this is REALLY a nuisance to me!
#3. Posted:
Hi_Im_Chris
  • Prospect
Status: Offline
Joined: Nov 04, 201014Year Member
Posts: 679
Reputation Power: 28
Status: Offline
Joined: Nov 04, 201014Year Member
Posts: 679
Reputation Power: 28
i got the same thing -__- i had my xenon for under a week though
#4. Posted:
-MyStic-
  • TTG Undisputed
Status: Offline
Joined: Dec 14, 201013Year Member
Posts: 5,229
Reputation Power: 256
Status: Offline
Joined: Dec 14, 201013Year Member
Posts: 5,229
Reputation Power: 256
Send it off so someone can repair it
#5. Posted:
Doggies
  • TTG Senior
Status: Offline
Joined: Sep 12, 201014Year Member
Posts: 1,236
Reputation Power: 69
Status: Offline
Joined: Sep 12, 201014Year Member
Posts: 1,236
Reputation Power: 69
i used sissors, i had to go through 9 sissors to find the right size
#6. Posted:
Console_King
  • Rated Awesome
Status: Offline
Joined: Jul 24, 201014Year Member
Posts: 2,333
Reputation Power: 169
Status: Offline
Joined: Jul 24, 201014Year Member
Posts: 2,333
Reputation Power: 169
TTGBoi wrote can somebody please help me? this is REALLY a nuisance to me!
thats the thing with xenons, should always be expected that they have a really short life span. I suggest a reball from a local xbox repair place.
#7. Posted:
TTGBoi
  • TTG Addict
Status: Offline
Joined: Jul 27, 201014Year Member
Posts: 2,723
Reputation Power: 121
Status: Offline
Joined: Jul 27, 201014Year Member
Posts: 2,723
Reputation Power: 121
-MyStic- wrote Send it off so someone can repair it
I can't right now because i'm at my grandma's and i am going to be going around to different houses a lot in the next month so i don't know if i will get it back lol

Doggies wrote i used sissors, i had to go through 9 sissors to find the right size
Can you describe how big the scissors were and the fashion you were using the scissors?????

-TTGBoi
#8. Posted:
Colorado880
  • TTG Undisputed
Status: Offline
Joined: Dec 22, 200914Year Member
Posts: 5,352
Reputation Power: 461
Status: Offline
Joined: Dec 22, 200914Year Member
Posts: 5,352
Reputation Power: 461
If you are inexperienced with fixing jtags, the easiest way is to let it overheat itself. It is really risky and not recommended but it does fix the problem temporarily. You are going to need a reflow soon.


Stick something in the fans in the back to make them stop and let the console run for 3 mins while it is overheating. After those 3 minutes are up, let the console cool for 45 mins to an hour and boot it back up. If it doesn't work, you will need a good reflow to get it going again.


If you need a reflow, here are some suggestions for people to send it to
nitz0 - Trusted and comes with warranty
Icy-Tank - Moderator and Trusted Seller
#9. Posted:
-Agis-
  • Junior Member
Status: Offline
Joined: May 07, 201113Year Member
Posts: 93
Reputation Power: 4
Status: Offline
Joined: May 07, 201113Year Member
Posts: 93
Reputation Power: 4
You can look up the towel trick on youtube for a visual help.
#10. Posted:
TTGBoi
  • TTG Addict
Status: Offline
Joined: Jul 27, 201014Year Member
Posts: 2,723
Reputation Power: 121
Status: Offline
Joined: Jul 27, 201014Year Member
Posts: 2,723
Reputation Power: 121
-Agis- wrote You can look up the towel trick on youtube for a visual help.
i am most DEFINITELY NOT doing the towel trick.... shame on you for even recommending that!
Jump to:
You are viewing our Forum Archives. To view or take place in current topics click here.