If your console is booting but not displaying an image, start it up using the controller, and as soon as the first quadrant turns green to indicate that the Xbox is on, pull RT and press Y at the same time to reset your resolution. Make sure to hold it down for at least 20 seconds.

Hope this helps.

vSmithy wrote If your console is booting but not displaying an image, start it up using the controller, and as soon as the first quadrant turns green to indicate that the Xbox is on, pull RT and press Y at the same time to reset your resolution. Make sure to hold it down for at least 20 seconds.

Hope this helps.

no quadrants light up on the console
it just turns on and only the little power symbol is green but it does turn on with the controller

JTAGUK wrote Is it a JTAG or RGH


RGH will have a little red light inside near the AV port

If RGH wait as boot times can be bad

If you have a nand reader flash back original nand and then see if you get RROD then get secondary error code and then google it to get your error

its a jtag dont think i have my og nand

Prom wrote If you leave it on for a while does the powerbrick turn orange? if so its your gpu

its always orange when its just sitting there to not turned on

Shoot it with a shotgun, And put it on youtube. Thats what i did !!

XxRedxNeckxX wrote Shoot it with a shotgun, And put it on youtube. Thats what i did !!

haha i just ordered a new one! i will think of something!

When you press the eject button, does Xell launch?

Liability wrote When you press the eject button, does Xell launch?

nothing happens at all it just opens

First off make sure all your wires are good etc. If that don't work seems to me like you have to reball you GPU chip.

PotimusMods wrote First off make sure all your wires are good etc. If that don't work seems to me like you have to reball you GPU chip.

yea hdmi and av cables dont work i turn it on with the controller then the console turns on no sync lights come on ar anything and the controller just flashes