Problem : Controller wont connect

1.Take a good image you have, before you used the bad KV. Rename to updflash.bin

2.Place it in the root of your flash drive.

3.Unplug your Jtag.

4. Power it on using the Eject button

5. Allow it to detect flash drive and flash.

Problem: Christmas Lights

Ok you must have:
-The Nand + CPU-Key of Banned Console
-The Nand + CPU-Key of UnBanned Console
-360 Flash Tool
-NandPro

Steps:
1.(Get UnBanned KV)
-Open 360 Flash Tool
-Enter CPU-key of UnBanned Console
-Check off 1BL Option
-Open the UnBanned Consle Nand.bin
-Click Extract
-Select KeyVault
-Save it
(Skip Step1 if you have a KV_dev.bin file)

2.(Insert UnBanned KV)
-Open 360 Flash Tool
-Enter CPU-key of Banned Console
-Check off 1BL Option
-Open the Banned Consle Nand.bin
-Click Import
-Select KeyVault (KV_dec.bin)
-Save it

3.(Flash New KV to Console)
-Place newly saved nand.bin in NandPro Folder
-Connect Banned Console to LPT
Run Commands
-NandPro Nand.bin: -r16 rawkv.bin 1 1
-NandPro Nand.bin: -r16 rawconfig.bin 3de 2
-NandPro lpt: -w16 rawkv.bin 1 1
-NandPro lpt: -w16 rawconfig.bin 3de 2

Ok you must have:
-The Nand + CPU-Key of Banned Console
-The Nand + CPU-Key of UnBanned Console
-360 Flash Tool
-NandPro

Steps:
1.(Get UnBanned KV)
-Open 360 Flash Tool
-Enter CPU-key of UnBanned Console
-Check off 1BL Option
-Open the UnBanned Consle Nand.bin
-Click Extract
-Select KeyVault
-Save it
(Skip Step1 if you have a KV_dev.bin file)

2.(Insert UnBanned KV)
-Open 360 Flash Tool
-Enter CPU-key of Banned Console
-Check off 1BL Option
-Open the Banned Consle Nand.bin
-Click Import
-Select KeyVault (KV_dec.bin)
-Save it

3.(Flash New KV to Console)
-Place newly saved nand.bin in NandPro Folder
-Connect Banned Console to LPT
Run Commands
-NandPro Nand.bin: -r16 rawkv.bin 1 1
-NandPro Nand.bin: -r16 rawconfig.bin 3de 2
-NandPro lpt: -w16 rawkv.bin 1 1
-NandPro lpt: -w16 rawconfig.bin 3de 2

Problem: KV Missing blocks

1. Reflash the nand with LPT or usb nandflasher