You will need these files :
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]

---

Now make a Folder on your desktop and call it whatever you want then inside that folder make another 2 folders and call the following folders
1st folder - CoD parts
2nd folder - Patches
Then after downloading everything put all CoD parts in the CoD parts Folder and all the patches into the Patches folder

Ok now follow these steps carefully

1. Extract Part one of the 7 Cod files to the CoD parts Folder(only part one)
2. Extract What ever patch you want to the Patches Folder(only one patch at a time)
3. Open Abgx360 and go to Options and check mark the Following boxes
-Check/Fix Video padding
-Show Avatar awards
Then go to Auto Fix and check mark the following Box and Change Auto Fix Threshold to:
-Level 3 AutoFix if stealth passes,but fails varification
-Adjust SS v1 angle 359 for iXtreme < v1.4

4.Go to the top bar and click on the open folder and open up your CodWaW ISO file in the CoD parts folder.

5.Press the Blue Launch button at the bottom of Abgx360 an extra screen should pop up with a bunch of words just wait and if you look to the bottom of the text you will see a timer just wait for the timer to stop and wait for it to say press any key to quit.After quiting go ahead close Abgx360.

!!!Warning!!! -All Text That are colored Must be Green or Grey if any other colors pop up it means you didnt do it correctly- !!!Warnning!!!

6. Open Wx360 go to File and open your CoDWaW ISO file.

7. Scroll down to the Following Left click and Extract them to the desktop
- code_post_gfx.ff
- common.ff
- default.xex

8. Go to The following and replace with the following
- code_post_gfx.ff <> code_post_gfx.ff
- common.ff <> common.ff
- default.xex <> default.xex
!!!Look!!!

complete in the following order

[ Register or Signin to view external links. ]

Then

[ Register or Signin to view external links. ]

Then Replace code_post_gfx.ff with

[ Register or Signin to view external links. ]

Repeat the last 3 with common.ff
Then for Default.xex replace with extracted default.xex on desktop

[ Register or Signin to view external links. ]

9.Repeat Steps for Abgx360

10. Open Image Burn and click on Write Image File to Disc Then go to tools and click on settings
[ Register or Signin to view external links. ]

11. After clicking settings at the very top it should say general and to the right a couple tabs it should say Write click on that.

12. In options for page 1 check mark the following boxes

- Auto change book type
- DVD+R finalize disc(minimal radius)
- Enable BURN-Proof
- Lock volume-Exclusive access
- Ignore mounted file system drivers
- Cycle Tray before verify
- Never Delete audio files

13. In options for Layer Break(For DL Media) click on user specified and for Then for the Sectors in LO type and check mark the following boxes after

- 1913760
- Auto export graph data
- prefer format with full certification
- prefer properly formated discs

For prefered format size click on Preferred

then click ok

14. Make sure write speed is 2.4x and copies is 1
check mark the box where it says verify

!!!IMPORTANT!!!
15. Where it says Please select file click on the folder with a magnified glass on the folder and open

- CoDWaW DVD file not CoDWaW ISO file

Then after that step below The verify box the Disc on The paper with an arrow pointing to a disc with a laser burn on it should highlight click on that and wait for your disc to finish burning it should take about 40 to 60 mins depending on how slow or fast your computer is....