FOLLOW THE NOTES FOR EACH PICTURE! DO NOT JUST LOOK AT THE PICTURES!

Everything needed for this tutorial!

1.X360 USB PRO
2.SATA cable
3.power cable (USB)
P.S. all these come included with the x360




Extract the driver files from the .zip file to anywhere you want (i did to desktop)
[ Register or Signin to view external links. ]

NOTE: before starting make sure the switch is set to OFF, (ON switch is for updating the tools firmware)

now connect the X360 to your computer or laptop
[ Register or Signin to view external links. ]

now were gonna install the drivers (manually)
1. open computer management
2. select device manager
[ Register or Signin to view external links. ]

3. now find the X360 USB PRO and right click on that and select "update driver software"
[ Register or Signin to view external links. ]

now a window will pop up saying: How do you want to search for software? select "browse my computer driver software"
[ Register or Signin to view external links. ]

Now you need to go to the directory where your files are located (desktop) and select them and click ok
[ Register or Signin to view external links. ]

after selecting the correct files click next


a red security message will pop up just ignore it and select "install driver software anyway"
[ Register or Signin to view external links. ]

now you are all done just click close

just to make sure everything went as planned, open computer management and select device manager and everything should look like this
[ Register or Signin to view external links. ]
The X360 will be given the name "LIBUSB-win32 Devices"

I DO NOT TAKE FULL CREDIT DUE TO I DIDNT MAKE THE WHOLE TUTORIAL I LEARNED THIS FROM [ Register or Signin to view external links. ] (i made the tutorial all by my self though)

ALSO NOTE! this is not a power kit, it is simply a way to connect your drive to your computer

for a way to power on the drive i advisse using the CK3 Lite

here is the link to the bundle

[ Register or Signin to view external links. ]