Use Program to Create Vista Installation USB Key

NOTE: You will need to have a Vista ISO file to do this. If you do not have one, then you can use the Create image file from disc feature of the free program ImgBurn with your Vista installation DVD to create the ISO file.

1. Download and install the trial version of UltraIso.

2. Plug in your USB key.

3. Right click on the UltraIso shortcut, and click on Run as administrator.

4. Click on File (menu bar) and Open. (See screenshot below)
[ Register or Signin to view external links. ]

5. Navigate to your Vista ISO file and select it and click on the Open button. (See screenshot below)
[ Register or Signin to view external links. ]

6. In the bottom Local pane, select your USB flash key drive. (See screenshot below)
[ Register or Signin to view external links. ]

7. Click on Bootable (menu bar) and Write Disk Image. (See screenshot above)

8. Make sure the locations are correct, and check the Verify box and click on the Write button. (See screenshot below)

[ Register or Signin to view external links. ]

9. Click on Yes to confirm writing to the USB drive.

10. When it's done, click on the Close button. (See screenshot below)

[ Register or Signin to view external links. ]

11. You now have a Vista installation USB flash key drive.




Links:
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]