Ok lets get started, first you will need to buy a hard drive to use in the Xbox 360.

Hddhackr will only work with the following Western Digital Drives:
- WD Scorpio Series BEVS/BEAS
- WD Scorpio Blue Series BEVS/BEVT/BPVT
- WD Scorpio Black Series BEKT/BJKT
- WD VelociRaptor Series
- WD AV-25 Series BUDT

As of version 1.30, Hddhackr now works with all sizes and versions of the Western Digital Scorpio Series.
You can not use another make of hard drive for this hack, it has to be one of the supported Western Digital drives.

250gb WD Scorpio Blue Series drive (WD2500BEVT) for around 30gbp at CCL Computers .

For those of you who live in the US, you can get the same drive for around $47 at newegg.com/Product/Product.aspx?...6ddadd250c .

I would highly recommend you also purchase a Western Digital Scorpio Blue Drive, you have nothing to gain by buying a more expensive drive.






The first thing you will want to do is create a bootable USB drive, for this I used a tool called Bootable USB Drive Creator Tool.

Download Bootable USB Drive Creator Tool

Unzip and load the program, be sure to right click and run as an administrator.

Select your USB drive
Set the file system as FAT
Tick quick format and Create bootable drive
Select the box with 3 dots and choose the USB Drive Boot Files\MS-DOS folder as the location.
Hit start and you will have a bootable usb drive within a few seconds.





Now Download Xbox 360 250GB Hard Drive Security Sector and Download HddHackr v1.30 Build 20110303

For anyone who wants to hack a diffrent size drive here are the security sectors that can be used for a:
20gb drive
60gb drive
120gb drive

Unzip both to the USB drive you just made bootable

Be sure to rename the HDDSS_250GB.BIN to HDDSS.BIN

The end result should be something like this, dont worry you will not have an UNDO.BIN yet.

[img][/img]

You will need to shut down your pc now, I would advise you disconnect all the other hard drive in your computer just to stop you accidently hacking the wrong drive!

Now connect the hard drive you want to hack to your computer

[img][/img]

Power your computer back on, before you carry on it might be an idea to enter you bios configuration and ensure the SATA operation mode is set to ATA or disable AHCI depending on the options you have. On some motherboards this can also be called legacy or enhanced, if you are presented with this you want to set it to legacy. This will vary depending on your motherboard / bios.

The above appears to be the most common cause for people not been able to flash there drives.

Now tell your computer to to boot from the usb drive, this will be different depending on your motherboard, on my pc I have to press F11 then select the drive I wish to boot from.

You will find yourself at a dosprompt, type hddhackr and press enter.



All been well hddhackr will have listed all the drives in your system, in my case the drive I want to hack is number 5.



After entering the number you will be asked if you want to dump, flash or restore the firmware, select F to flash.

Type in the name of the security sector you want to flash, this will be HDDSS.BIN if you have followed this tutorial.

You will get a message saying that the information in file HDDSS.BIN does not match the drives firmware info. Do you want to flash the Xbox 360 compatible firmware.

Say yes to this:



You will then be asked if you also want to create partition 0/2/3

Again say yes to this, you drive should now be hacked, congratulations!



An UNDO.BIN will have been saved on your USB drive, keep this safe as you will need it for if you ever want to restore the drive back to normal.