Tutorials Navigation
E69 Error - How To Unlock Your 360 HDD Without Losing Any Da
Tutorial Name: E69 Error - How To Unlock Your 360 HDD Without Losing Any Da
Category: Xbox 360 Tutorials
Submitted By: ImxJ399
Date Added:
Comments: 4
Views: 7,350
Related Forum: Xbox Forum
Share:
There are many SATA and USB chipsets that change the HPA on a 360 HDD when connected hence causing it to set it's security bit and making it unreadable by the Xbox (E69 Error)
You will need to have your 360 drive connected to your primary onboard SATA port (if you have a PHAT drive you can use a CK3 HDD Adapter or simply take the drive out of its case)
1. Make sure your SATA is in IDE/LEGACY mode and not AHCI (HDAT2 says that it works in AHCI but it didn't on my motherboard...it may be different with yours)
[ Register or Signin to view external links. ]
2. Boot from the CD and you will be asked to type HDAT2 and then press enter. You will see a couple of detection sequences where you will need to press enter a couple of times to get to the menu. They look like this:
[ Register or Signin to view external links. ]
3. You will see your 360 HDD connected on the main menu (We used a 120GB drive). Notice the red exclamation mark? That's a warning to say the drives security system is locked (!SECURITY : ENABLED + LOCKED). Select the drive and press enter.
[ Register or Signin to view external links. ]
4. Scroll down to Security Menu and press enter
[ Register or Signin to view external links. ]
5. Scroll down to Unlock Device and press enter
[ Register or Signin to view external links. ]
6. Type 'S' for SET and press enter.
[ Register or Signin to view external links. ]
7. Type 'Y" and press enter
[ Register or Signin to view external links. ]
8. Unlock completed successfully. Now press any key...
[ Register or Signin to view external links. ]
9. Security status now says Disabled. Press ESC.
[ Register or Signin to view external links. ]
10. The red exclamation mark is now gone and the security lock has been removed. You can now press ESC back to DOS and reboot your computer (If you disconnected your master boot hard drive remember to connect that back up and re-enable AHCI if you disabled it in step 1)
[ Register or Signin to view external links. ]
11. Connect the HDD to your Xbox 360 and Voila !
Many thanks to Braveheart43, And Team-Exacuter for these images.
Ratings
Comments
CPx1989Posted:
Even I wish I new about this tutorial a long time ago when my hdd had E69. I just sold the hdd for $2 and bought a new one. xD Soo Glad I knew how to transfer files because when a hard drive has e69 you can still take the files off with modio or horizon and then put the files on a new hard drive
You could've just soldered 2 pins on the hdd and it would work again
OdinPosted:
I wish I new about this tutorial a long time ago when my hdd had E69. I just sold the hdd for $2 and bought a new one. xD Soo Glad I knew how to transfer files because when a hard drive has e69 you can still take the files off with modio or horizon and then put the files on a new hard drive
Related Tutorials
- 01. How to remove family settings/parental controls on Xbox 360(4,339)
- 02. Pico Flasher ISD / Sonus Programming(3,673)
- 03. College Football Revamped Tutorial/Installation(7,235)
- 04. (JTAG/RGH) How-To Download, Extract & Play Goldeneye 007(7,397)
- 05. Darkest of Days Achievement Guide [XBOX 360](3,005)
- 06. College Hoops 2K6 Achievement Guide [XBOX 360](3,298)
- 07. Blazing Angels Achievement Guide [XBOX 360](3,308)
- 08. Avatar: The Burning Earth Achievement Guide(3,859)
- 09. 2006 FIFA World Cup Achievement Guide [XBOX 360](4,766)
- 10. Turok: Sniper!(2,546)
- 11. Turok: Impaler Ribbon(2,378)
- 12. Turok: Dino Dominance(2,425)
- 13. 0 Day Attack on Earth Achievements Guide(3,146)
- 14. Turok: Sell Your Shotguns(2,585)
- 15. Terminator: Salvation Achievement Guide(3,083)
"E69 Error - How To Unlock Your 360 HDD Without Losing Any Da" :: Login/Create an Account :: 4 comments