Tutorials Navigation

Tutorials :: New :: Popular :: Top Rated

Tutorials: 18,357 Categories: 12

Total Tutorial Views: 42,542,465

How to Permanently Fix the 3 Red Lights (RRoD)

Tutorial Name: How to Permanently Fix the 3 Red Lights (RRoD)  

Category: Xbox 360 Tutorials

Submitted By: Gossip

Date Added:

Comments: 5

Views: 4,735

Related Forum: Xbox Forum

Share:

How to Permanently Fix the 3 Red Lights (RRoD)


Items Needed
    - Arctic Silver 5 thermal paste
    - 24 5mm flat washers
    - 8 M5 x .8 x 10mm machine screws


Tools
    - T10 and T8 Torx
    - Pliers
    - Phillips screwdriver
    - 1/4 inch socket


Tutorial for opening the case

[ Register or Signin to view external links. ]

Method

Remove the dvd drive, air duct, Ring of light board, and all of the motherboard screws on the bottom. Pull the motherboard out of the metal case

Flip the motherboard over and you will see Microsofts cheap x clamps. These are the main cause of the 3 red lights. We need to pry these off, I use pliers but you can use a small flathead screwdriver. either way, be VERY careful not to damage the motherboard in the process.

Flip the motherboard over again and pull off the heatsinks.

Clean off the excess of the old thermal paste on both the CPU/GPU and heatsinks. I use a razor blade.

Use a 1/4" socket to remove the feet from both heatsinks.

Take your screws and washers...

...And put 1 washer on each screw.

Take your thermal paste and put a SMALL amount of paste on each chip. Dont apply too much or it will ooze off of the chip when you clamp the heatsink down.

Flip the motherboard over, take 4 screws and put them through the same holes the heatsink feet used to go through.

Flip the motherboard over again with your hand under the screws holding them in place. Put 2 washers on each screw.

Heres the tricky part, you have to hold the screws in place while threading them into the heatsinks. I flip the motherboard on its side then thread the screws into the heatsink.

Flip the motherboard over and screw them in as tight as you can.

Repeat with the other side.

Put the motherboard back in the metal casing and plug in the ring of light, AV and power cables.

Turn it on, you will most likely still have the 3 red lights.

If you do, leave the fan unplugged and let it run until it overheats (2 red lights). Wait a few more minutes then turn it off.

Let it cool for a minute then turn it on and see if it worked.

If its green lights put everything back together and your good to go!

Ratings

Current rating: 1.83 by 6 users
Please take one second and rate this tutorial...

Not a Chance
1
2
3
4
5
6
7
8
9
10
Absolutely

Comments

"How to Permanently Fix the 3 Red Lights (RRoD)" :: Login/Create an Account :: 5 comments

If you would like to post a comment please signin to your account or register for an account.

TOXICPosted:

I didnt even know there was a permanent fix for this, I followed a few tutorial on youtube back in the day, and all of them failed. I just give up in the end and bought a new xbox 360 lol

KatsumiPosted:

I have never really tried out this method. I got the Red ring of death once but just did the towel overheating method and bought a new Xbox eventually. This should really help if the problem occurs for me again

MultitaskPosted:

does this really work?

oWaGWaNoPosted:

xGINGERxNINJAx done all that and it still doesnt work any sujections


LOL, Thats Like the Worst Thing ever!, i Fix Xboxes for a Living and No Lie But a Over + Xbox Mother Board = FIXED Telling u That Now Becuase thats how i Fix Xboxes and works for about 1 Year!

xGINGERxNINJAxPosted:

done all that and it still doesnt work any sujections