TTG_SETH wrote NEW PICS! IMPROVED TUT!

Here is a tut on how to make your xbox anti rrod. VERY EASY TO DO!

3 case fans from ebay is 15 bucks, talismoon is 20


TTG_Doom has done this and he says its worked so ask him!
:!:
Same with PredatorX

Video of it running

It will look like this:

[ Register or Signin to view external links. ]


Tools needed

- Rotary tool (dremel)
- 3 Computer case fans (80 mm)
- Xbox 360
- Cutting bit
- Plastic on Plastic epoxy, or hot glue.
- PC power supply

-------------------------------------------------

Step 1

First you need to take apart your xbox and clean it for cutting.
----------------------------------------------------

Step 2

Now you need to Grab the top of you xbox and trace a cut for your fan (over heat sink)

Cut around this area:

[ Register or Signin to view external links. ]

Here is under view

[ Register or Signin to view external links. ]
------------------------------------------------------
Step 3

Now you need to glue one of the fans up-top like this, make sure it is directly over your cut

[ Register or Signin to view external links. ]

It should be right over the intercooler to -------------------------------------------------------
Step 4

Now set that aside and let it dry.

Now it is time to cut for the side fans.
---------------------------------------------------------
Step 5

First take all screws connecting the board of the xbox to the metal case.

Now look at the side where the harddrive DOESNT go and look at the little holes. Cut all around them with your dremel.

Cut around these little holes

[ Register or Signin to view external links. ]

Here is what your cut should look like:

[ Register or Signin to view external links. ]
---------------------------------------------------------
Step 6

Once thoes are cut you need to cut through the grey side piece.


[ Register or Signin to view external links. ]

Line the gray piece up and cut where the metal is cut (this is after the cut)

[ Register or Signin to view external links. ]
---------------------------------------------------------
Step 7

Now use the hotglue or epoxy and glue 1 side fans over your cuts, like this

[ Register or Signin to view external links. ]

Then do the other one

[ Register or Signin to view external links. ]
----------------------------------------------------------
Step 8

Time to power everything up!

Your fans should have 4 pin power connectors, like this :

[ Register or Signin to view external links. ]
----------------------------------------------------------
Step 9

Now all over your power supply there should be connectors like that, plug each fan into one, and if you have to identical fans, they might be able to plug into eachother so they will only use 1 plug!
-----------------------------------------------------------
Step 10 (last one)

Now to make your Power supply run you have to tie a green and black wire together, then put over elctrical tape, if you cant find these, google it, there are many results

[ Register or Signin to view external links. ]
------------------------------------------------------------------
Optional steps (whisper max legacy)


This step is optional but can help very much!

As your xbox is taken apart install a talismoon whisper max legacy, you can find them on ebay for 24 dollars.

[ Register or Signin to view external links. ]


Also you can do the x-clamp fix.


And ofcourse add jasper heatsinks if you dont have them


Please say thanks if this helped you!!! This took me a longgg time to make!


Also rep is awsome to XD





PLEASE NOTE THIS IS MY POST AS OF I AM THE ORIGINATOR, PLEASE NO ONE COPY!

Post goals

-10 views x
-50 views x
-100 views x
-250 views x
-400 views x
-450 views x
-500 views x
-750 views x
-1000 views x
-1500 views
-2500 views
-5000 views
-10000 views
-10 thanks x
-25 thanks
-50 thanks
-100 thanks
-10 replies x
-25 replies x
-50 replies x
-75 replies x
-90 replies x
-100 replies
-250 replies
-500 replies
-1000 replies
- sticky :!:

XBL-Universe wrote

TTG_SETH wrote NEW PICS! IMPROVED TUT!

Here is a tut on how to make your xbox anti rrod. VERY EASY TO DO!

3 case fans from ebay is 15 bucks, talismoon is 20


TTG_Doom has done this and he says its worked so ask him!
:!:
Same with PredatorX

Video of it running

It will look like this:

[ Register or Signin to view external links. ]


Tools needed

- Rotary tool (dremel)
- 3 Computer case fans (80 mm)
- Xbox 360
- Cutting bit
- Plastic on Plastic epoxy, or hot glue.
- PC power supply

-------------------------------------------------

Step 1

First you need to take apart your xbox and clean it for cutting.
----------------------------------------------------

Step 2

Now you need to Grab the top of you xbox and trace a cut for your fan (over heat sink)

Cut around this area:

[ Register or Signin to view external links. ]

Here is under view

[ Register or Signin to view external links. ]
------------------------------------------------------
Step 3

Now you need to glue one of the fans up-top like this, make sure it is directly over your cut

[ Register or Signin to view external links. ]

It should be right over the intercooler to -------------------------------------------------------
Step 4

Now set that aside and let it dry.

Now it is time to cut for the side fans.
---------------------------------------------------------
Step 5

First take all screws connecting the board of the xbox to the metal case.

Now look at the side where the harddrive DOESNT go and look at the little holes. Cut all around them with your dremel.

Cut around these little holes

[ Register or Signin to view external links. ]

Here is what your cut should look like:

[ Register or Signin to view external links. ]
---------------------------------------------------------
Step 6

Once thoes are cut you need to cut through the grey side piece.


[ Register or Signin to view external links. ]

Line the gray piece up and cut where the metal is cut (this is after the cut)

[ Register or Signin to view external links. ]
---------------------------------------------------------
Step 7

Now use the hotglue or epoxy and glue 1 side fans over your cuts, like this

[ Register or Signin to view external links. ]

Then do the other one

[ Register or Signin to view external links. ]
----------------------------------------------------------
Step 8

Time to power everything up!

Your fans should have 4 pin power connectors, like this :

[ Register or Signin to view external links. ]
----------------------------------------------------------
Step 9

Now all over your power supply there should be connectors like that, plug each fan into one, and if you have to identical fans, they might be able to plug into eachother so they will only use 1 plug!
-----------------------------------------------------------
Step 10 (last one)

Now to make your Power supply run you have to tie a green and black wire together, then put over elctrical tape, if you cant find these, google it, there are many results

[ Register or Signin to view external links. ]
------------------------------------------------------------------
Optional steps (whisper max legacy)


This step is optional but can help very much!

As your xbox is taken apart install a talismoon whisper max legacy, you can find them on ebay for 24 dollars.

[ Register or Signin to view external links. ]


Also you can do the x-clamp fix.


And ofcourse add jasper heatsinks if you dont have them


Please say thanks if this helped you!!! This took me a longgg time to make!


Also rep is awsome to XD





PLEASE NOTE THIS IS MY POST AS OF I AM THE ORIGINATOR, PLEASE NO ONE COPY!

Post goals

-10 views x
-50 views x
-100 views x
-250 views x
-400 views x
-450 views x
-500 views x
-750 views x
-1000 views x
-1500 views
-2500 views
-5000 views
-10000 views
-10 thanks x
-25 thanks
-50 thanks
-100 thanks
-10 replies x
-25 replies x
-50 replies x
-75 replies x
-90 replies x
-100 replies
-250 replies
-500 replies
-1000 replies
- sticky :!:

XBL-Universe wrote

XBL-Universe wrote

TTG_SETH wrote NEW PICS! IMPROVED TUT!

Here is a tut on how to make your xbox anti rrod. VERY EASY TO DO!

3 case fans from ebay is 15 bucks, talismoon is 20


TTG_Doom has done this and he says its worked so ask him!
:!:
Same with PredatorX

Video of it running

It will look like this:

[ Register or Signin to view external links. ]


Tools needed

- Rotary tool (dremel)
- 3 Computer case fans (80 mm)
- Xbox 360
- Cutting bit
- Plastic on Plastic epoxy, or hot glue.
- PC power supply

-------------------------------------------------

Step 1

First you need to take apart your xbox and clean it for cutting.
----------------------------------------------------

Step 2

Now you need to Grab the top of you xbox and trace a cut for your fan (over heat sink)

Cut around this area:

[ Register or Signin to view external links. ]

Here is under view

[ Register or Signin to view external links. ]
------------------------------------------------------
Step 3

Now you need to glue one of the fans up-top like this, make sure it is directly over your cut

[ Register or Signin to view external links. ]

It should be right over the intercooler to -------------------------------------------------------
Step 4

Now set that aside and let it dry.

Now it is time to cut for the side fans.
---------------------------------------------------------
Step 5

First take all screws connecting the board of the xbox to the metal case.

Now look at the side where the harddrive DOESNT go and look at the little holes. Cut all around them with your dremel.

Cut around these little holes

[ Register or Signin to view external links. ]

Here is what your cut should look like:

[ Register or Signin to view external links. ]
---------------------------------------------------------
Step 6

Once thoes are cut you need to cut through the grey side piece.


[ Register or Signin to view external links. ]

Line the gray piece up and cut where the metal is cut (this is after the cut)

[ Register or Signin to view external links. ]
---------------------------------------------------------
Step 7

Now use the hotglue or epoxy and glue 1 side fans over your cuts, like this

[ Register or Signin to view external links. ]

Then do the other one

[ Register or Signin to view external links. ]
----------------------------------------------------------
Step 8

Time to power everything up!

Your fans should have 4 pin power connectors, like this :

[ Register or Signin to view external links. ]
----------------------------------------------------------
Step 9

Now all over your power supply there should be connectors like that, plug each fan into one, and if you have to identical fans, they might be able to plug into eachother so they will only use 1 plug!
-----------------------------------------------------------
Step 10 (last one)

Now to make your Power supply run you have to tie a green and black wire together, then put over elctrical tape, if you cant find these, google it, there are many results

[ Register or Signin to view external links. ]
------------------------------------------------------------------
Optional steps (whisper max legacy)


This step is optional but can help very much!

As your xbox is taken apart install a talismoon whisper max legacy, you can find them on ebay for 24 dollars.

[ Register or Signin to view external links. ]


Also you can do the x-clamp fix.


And ofcourse add jasper heatsinks if you dont have them


Please say thanks if this helped you!!! This took me a longgg time to make!


Also rep is awsome to XD





PLEASE NOTE THIS IS MY POST AS OF I AM THE ORIGINATOR, PLEASE NO ONE COPY!

Post goals

-10 views x
-50 views x
-100 views x
-250 views x
-400 views x
-450 views x
-500 views x
-750 views x
-1000 views x
-1500 views
-2500 views
-5000 views
-10000 views
-10 thanks x
-25 thanks
-50 thanks
-100 thanks
-10 replies x
-25 replies x
-50 replies x
-75 replies x
-90 replies x
-100 replies
-250 replies
-500 replies
-1000 replies
- sticky :!:

XBL-Universe wrote

XBL-Universe wrote

XBL-Universe wrote

TTG_SETH wrote NEW PICS! IMPROVED TUT!

Here is a tut on how to make your xbox anti rrod. VERY EASY TO DO!

3 case fans from ebay is 15 bucks, talismoon is 20


TTG_Doom has done this and he says its worked so ask him!
:!:
Same with PredatorX

Video of it running

It will look like this:

[ Register or Signin to view external links. ]


Tools needed

- Rotary tool (dremel)
- 3 Computer case fans (80 mm)
- Xbox 360
- Cutting bit
- Plastic on Plastic epoxy, or hot glue.
- PC power supply

-------------------------------------------------

Step 1

First you need to take apart your xbox and clean it for cutting.
----------------------------------------------------

Step 2

Now you need to Grab the top of you xbox and trace a cut for your fan (over heat sink)

Cut around this area:

[ Register or Signin to view external links. ]

Here is under view

[ Register or Signin to view external links. ]
------------------------------------------------------
Step 3

Now you need to glue one of the fans up-top like this, make sure it is directly over your cut

[ Register or Signin to view external links. ]

It should be right over the intercooler to -------------------------------------------------------
Step 4

Now set that aside and let it dry.

Now it is time to cut for the side fans.
---------------------------------------------------------
Step 5

First take all screws connecting the board of the xbox to the metal case.

Now look at the side where the harddrive DOESNT go and look at the little holes. Cut all around them with your dremel.

Cut around these little holes

[ Register or Signin to view external links. ]

Here is what your cut should look like:

[ Register or Signin to view external links. ]
---------------------------------------------------------
Step 6

Once thoes are cut you need to cut through the grey side piece.


[ Register or Signin to view external links. ]

Line the gray piece up and cut where the metal is cut (this is after the cut)

[ Register or Signin to view external links. ]
---------------------------------------------------------
Step 7

Now use the hotglue or epoxy and glue 1 side fans over your cuts, like this

[ Register or Signin to view external links. ]

Then do the other one

[ Register or Signin to view external links. ]
----------------------------------------------------------
Step 8

Time to power everything up!

Your fans should have 4 pin power connectors, like this :

[ Register or Signin to view external links. ]
----------------------------------------------------------
Step 9

Now all over your power supply there should be connectors like that, plug each fan into one, and if you have to identical fans, they might be able to plug into eachother so they will only use 1 plug!
-----------------------------------------------------------
Step 10 (last one)

Now to make your Power supply run you have to tie a green and black wire together, then put over elctrical tape, if you cant find these, google it, there are many results

[ Register or Signin to view external links. ]
------------------------------------------------------------------
Optional steps (whisper max legacy)


This step is optional but can help very much!

As your xbox is taken apart install a talismoon whisper max legacy, you can find them on ebay for 24 dollars.

[ Register or Signin to view external links. ]


Also you can do the x-clamp fix.


And ofcourse add jasper heatsinks if you dont have them


Please say thanks if this helped you!!! This took me a longgg time to make!


Also rep is awsome to XD





PLEASE NOTE THIS IS MY POST AS OF I AM THE ORIGINATOR, PLEASE NO ONE COPY!

Post goals

-10 views x
-50 views x
-100 views x
-250 views x
-400 views x
-450 views x
-500 views x
-750 views x
-1000 views x
-1500 views
-2500 views
-5000 views
-10000 views
-10 thanks x
-25 thanks
-50 thanks
-100 thanks
-10 replies x
-25 replies x
-50 replies x
-75 replies x
-90 replies x
-100 replies
-250 replies
-500 replies
-1000 replies
- sticky :!:

Thats cool what type of fan do u have sticking out of the top of it

Very nice tutorial!!
But what would you recommened for me to use if try and do a case modding??
What will I need like sanding paper/some kind of cutter/glue/and where can i get the plastic thing at? and what kind of plastic is it??

-TTG_Cool_Kid 8)

TTG_Cool_Kid wrote Very nice tutorial!!
But what would you recommened for me to use if try and do a case modding??
What will I need like sanding paper/some kind of cutter/glue/and where can i get the plastic thing at? and what kind of plastic is it??

-TTG_Cool_Kid 8)

Well you need a dremmel if you want to do modding to your current stock case, but the glass is plexiglass i think home depot and lowes cut them and its only like 4 dollars, make sure you use plexiglass its more flexible

ericfinch wrote Thats cool what type of fan do u have sticking out of the top of it

Its just a simple 80mm Computer case fan thats 4 dollars

TTG_SETH wrote

TTG_Cool_Kid wrote Very nice tutorial!!
But what would you recommened for me to use if try and do a case modding??
What will I need like sanding paper/some kind of cutter/glue/and where can i get the plastic thing at? and what kind of plastic is it??

-TTG_Cool_Kid 8)

Well you need a dremmel if you want to do modding to your current stock case, but the glass is plexiglass i think home depot and lowes cut them and its only like 4 dollars, make sure you use plexiglass its more flexible

Thanks Bro!!

-TTG_Cool_Kid 8)

TTG_SETH wrote NEW PICS! IMPROVED TUT!

Here is a tut on how to make your xbox anti rrod. VERY EASY TO DO!

3 case fans from ebay is 15 bucks, talismoon is 20


TTG_Doom has done this and he says its worked so ask him!
:!:
Same with PredatorX

Video of it running

It will look like this:

[ Register or Signin to view external links. ]


Tools needed

- Rotary tool (dremel)
- 3 Computer case fans (80 mm)
- Xbox 360
- Cutting bit
- Plastic on Plastic epoxy, or hot glue.
- PC power supply

-------------------------------------------------

Step 1

First you need to take apart your xbox and clean it for cutting.
----------------------------------------------------

Step 2

Now you need to Grab the top of you xbox and trace a cut for your fan (over heat sink)

Cut around this area:

[ Register or Signin to view external links. ]

Here is under view

[ Register or Signin to view external links. ]
------------------------------------------------------
Step 3

Now you need to glue one of the fans up-top like this, make sure it is directly over your cut

[ Register or Signin to view external links. ]

It should be right over the intercooler to -------------------------------------------------------
Step 4

Now set that aside and let it dry.

Now it is time to cut for the side fans.
---------------------------------------------------------
Step 5

First take all screws connecting the board of the xbox to the metal case.

Now look at the side where the harddrive DOESNT go and look at the little holes. Cut all around them with your dremel.

Cut around these little holes

[ Register or Signin to view external links. ]

Here is what your cut should look like:

[ Register or Signin to view external links. ]
---------------------------------------------------------
Step 6

Once thoes are cut you need to cut through the grey side piece.


[ Register or Signin to view external links. ]

Line the gray piece up and cut where the metal is cut (this is after the cut)

[ Register or Signin to view external links. ]
---------------------------------------------------------
Step 7

Now use the hotglue or epoxy and glue 1 side fans over your cuts, like this

[ Register or Signin to view external links. ]

Then do the other one

[ Register or Signin to view external links. ]
----------------------------------------------------------
Step 8

Time to power everything up!

Your fans should have 4 pin power connectors, like this :

[ Register or Signin to view external links. ]
----------------------------------------------------------
Step 9

Now all over your power supply there should be connectors like that, plug each fan into one, and if you have to identical fans, they might be able to plug into eachother so they will only use 1 plug!
-----------------------------------------------------------
Step 10 (last one)

Now to make your Power supply run you have to tie a green and black wire together, then put over elctrical tape, if you cant find these, google it, there are many results

[ Register or Signin to view external links. ]
------------------------------------------------------------------
Optional steps (whisper max legacy)


This step is optional but can help very much!

As your xbox is taken apart install a talismoon whisper max legacy, you can find them on ebay for 24 dollars.

[ Register or Signin to view external links. ]


Also you can do the x-clamp fix.


And ofcourse add jasper heatsinks if you dont have them


Please say thanks if this helped you!!! This took me a longgg time to make!


Also rep is awsome to XD





PLEASE NOTE THIS IS MY POST AS OF I AM THE ORIGINATOR, PLEASE NO ONE COPY!

Post goals

-10 views x
-50 views x
-100 views x
-250 views x
-400 views x
-450 views x
-500 views x
-750 views x
-1000 views x
-1500 views
-2500 views
-5000 views
-10000 views
-10 thanks x
-25 thanks
-50 thanks
-100 thanks
-10 replies x
-25 replies x
-50 replies x
-75 replies x
-90 replies x
-100 replies x
-250 replies
-500 replies
-1000 replies
- sticky :!:

great post!